BitFenix Raider PC Tower

E-mail Print
User Rating: / 3PoorBest 

Closer look at the Interior

The interior of the Raider is black in color as well. The motherboard tray has the typical cut-out for the CPU cooler and a few narrow openings to run cabling to the rear of the motherboard tray.

From first look you would think the Raider would not support very long graphic cards. But that is far from the truth. With the top HDD cage in place the case will support cards up to 10” long and with it removed just over 14.5” long.

The power supply sits on four rubber bumpers to absorb vibration. An additional 120mm fan can be added to the bottom of the case.

Here we see the rear mounted Spectre 120mm cooling fan.

Next, we have the rather large opening for a top mounted 200mm cooling fan.

The Raider is mostly tool-less and it can be seen by looking at the plastic locks that secure optical drives in place.

There are enough places in the case to mount six 2.5”/3.5” drives. The little drive will have to screw in while the larger 3.5” drive is secured without the use of a tool.